StampeGrafica - Make Your Brand

Crew Neck

70% combed cotton, 30% polyester. Crew sweatshirt, brushed on the inside. The neck, cuffs and bottom hem in ribbed, reinforcement on the collar, sleeves set-in, with a bust tubular. Outer fabric: 100% cotton. Label strappabile. 280 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
70,00
72,00
74,00
WIDTH
50,00
53,00
56,00
59,00
60,00
63,00

Lightweight Set-In Sweat

80% cotton Yarn Belcoro, 20% polyester. Light sweatshirt sgarzata with set-in sleeves set-in. The neck, cuffs and bottom hem in ribbed cotton/ Lycra. The structure with the bust tube.


240 g/m2 / Classic Fit.


MEASURE
S
M
L
XL
XXL
HEIGHT
67,00
70,00
73,00
76,00
79,00
WIDTH
51,00
56,00
61,00
63,50
68,50

Ladies Lightweight Raglan Sweat

80% cotton Yarn Belcoro 20% polyester. Light sweatshirt sgarzata. The raglan sleeves. The neck, cuffs and bottom hem in ribbed cotton/Lycra. Slightly shaped, with side seams.


240 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
62,00
63,50
65,00
66,50
68,00
69,50
WIDTH
46,00
48,50
51,00
53,50
56,00
58,50

Lightweight Raglan Sweat

80% cotton Yarn Belcoro, 20% polyester. Light sweatshirt sgarzata, raglan sleeves. The neck, cuffs and bottom hem in ribbed cotton/Lycra. The structure with the bust tube.


240 g/m2 / Classic Fit.


MEASURE
S
M
L
XL
XXL
HEIGHT
67,00
70,00
73,00
76,00
79,00
WIDTH
51,00
56,00
61,00
63,50
68,50

Classic Raglan Sweat

80% cotton ring-spun Belcoro, 20% polyester. Sweatshirt with set-in sleeves set-in, rib single jersey, brushed inside. The neck, cuffs and bottom hem in ribbed cotton/lycra. The structure with the bust tube. (Col. 30/94: 260 g/m2).


280 g/m2 / Classic Fit


MEASURE
S
M
L
XL
XXL
HEIGHT
67,00
69,50
73,50
77,00
80,00
WIDTH
51,00
56,00
61,00
63,50
68,50

Kids Classic Raglan Sweat

80% cotton, 20% polyester. Sweatshirt with set-in sleeves set-in, neck in ribbed cotton/lycra, tape the neck in a solid, brushed internally, the structure with the bust tube. (Col. 94: 260 g/m2).


280 g/m2 / Classic Fit.


MEASURE
3/4
5/6
7/8
9/11
12/13
14/15
HEIGHT
42,00
48,00
54,00
60,00
64,00
68,00
WIDTH
38,50
41,00
43,50
46,00
51,00
56,00

ID.202 50/50

50% cotton, 50% polyester. Sweatshirt unisex sleeves set-in. The neck, cuffs and bottom hem in 1x1 rib elastane. Structure with side seams, reinforced stitching on the arms and neck, brushed internally, no label.


270 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
70,00
72,00
74,00
WIDTH
48,00
51,50
55,00
58,50
62,00
65,50

ID.002



80% cotton, 20% polyester. Sweatshirt with set-in sleeves set-in, with a bust tubular, brushed internally. The neck, cuffs and bottom hem in 1x1 rib elastane.


280 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
70,00
72,00
74,00
WIDTH
48,00
51,50
55,00
58,50
62,00
65,50

Set In /Kids

80% cotton, 20% polyester. Sweatshirt with set-in sleeves set-in, brushed internally, the structure with side seams-fabric-PST (Perfect Sweat Technology), collar, cuffs and bottom hem in 1x1 rib with elastane.


260 g/m2 / Classic Fit.


MEASURE
3/4
5/6
7/8
9/11
12/14
HEIGHT
43,00
48,00
53,00
58,00
63,00
WIDTH
36,00
40,00
43,00
46,00
50,00

ID.003

80% cotton, 20% polyester. Sweatshirt with set-in sleeves set-in, lined hood and drawstring, cuffs and bottom hem in 1x1 rib trim, front kangaroo pocket, brushed internally, the structure with the bust tube.


280 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
63,50
65,50
67,50
69,50
71,50
73,50
WIDTH
48,00
51,50
55,00
58,50
62,00
65,50

Promo Cap

100% cotton. Cap, 5 panels with velcro closure strap, anti-sweat polyester, stitched eyes, front panel, hard, visor precurvata, one size.


160 g/m2.

Promo Cap Kids

100% cotton. Cap from baby to 5 panels with velcro closure strap, anti-sweat polyester, stitched eyes, front panel, hard, visor precurvata.

cap 5 panels
sweat band
eyelets embroidered
bezel reinforced
hard visor shaped
velcro closure adjustable
the reactive colours
Material: 100% cotton jersey
Size: one size

cap 5 panels, cotton twill 108/58 - sweat band
eyelets-embroidered - front-reinforced
visor double panel rigid moulded
velcro closure adjustable
the reactive colours
Material: 100% cotton
Size: one size

cap 5 panels baby cotton twill 108/58
sweat band in matching colour
eyelets embroidered
bezel reinforced
hard visor shaped
hook and loop closure-adjustable color-matched
the reactive colours
Material: 100% cotton
Size: one size

cap 5 panels, cotton twill 108/58
sweat band in matching colour
eyelets embroidered
bezel reinforced
hard visor shaped
Italy flag embroidered
hook and loop closure-adjustable color-matched
the reactive colours
Material: 100% cotton
Size:one size

cap 5 panels, cotton twill 108/58
sweat band in matching colour
eyelets embroidered
bezel reinforced
hard visor shaped
Italian flag printed on the visor
hook and loop closure-adjustable color-matched
the reactive colours
Material: 100% cotton
Size: one size

cap 5 panels, cotton twill 108/58
sweat band in matching colour
eyelets embroidered
bezel reinforced
hard visor shaped
hook and loop closure-adjustable color-matched
the reactive colours
Material: 100% cotton
Size: one size

cap 5 panels, cotton twill 108/58
sweat band in matching colour
eyelets embroidered
bezel reinforced
hard visor contoured with contrast piping
hook and loop closure-adjustable color-matched
the reactive colours
Material: 100% cotton
Size: one size

cap 3-panel cotton twill 108/58
hard visor
elastic closure
Material: 100% cotton
Size: one size

Men's Zip-Off Softshell Jacket

100% polyester. Jacket in softshell with 3-layer fabric, membrane, TPU, windproof and water-repellent (water column 5,000 mm), breathable and permeable to vapour. High neck, contrast piping on the front, on the back and on the sleeves. Zip hidden front, reflective detail on shoulders, back, and sleeves. two side pockets with zip, one internal pocket, sleeve pocket with zip reflective. Detachable sleeves. 230 g/m2


MEASURE
S
M
L
XL
XXL
HEIGHT
68,00
70,00
72,00
74,00
76,00
WIDTH
53,00
56,00
60,00
64,00
68,00

Ladies' Zip-Off Softshell Jacket

100% polyester. Jacket in softshell fabric, three-ply with membrane tpu, windproof and water-repellent (water column 5,000 mm), breathable and permeable to vapour. High neck, contrast piping on the front, on the back and on the sleeves. Hidden front zipper, reflective detail on shoulders, back, and sleeves. two side pockets with zip, one internal pocket, sleeve pocket with zip reflective. Detachable sleeves. 230 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
64,00
65,00
67,00
69,00
71,00
WIDTH
49,00
51,00
55,00
59,00
63,00

Men's Promo Jacket Softshell

100% polyester. Jacket, softshell, two-layer, water-repellent, windproof and breathable. The inner side of soft microfleece, front full zip with chin guard. 2 side pockets with zip, 2 inside pockets, elastic cuffs. 280 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
70,00
72,00
74,00
76,00
78,00
WIDTH
54,00
57,00
61,00
65,00
69,00

Ladies' Promo Softshell Jacket

100% polyester. Jacket, softshell, two-layer, water-repellent, windproof and breathable, inner part in soft microfleece, front zip with chin guard. 2 side pockets with zip, 2 inside pockets, elastic cuffs, slightly tight-fitting. 280 g/m2.



MEASURE
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
69,00
71,00
WIDTH
50,00
54,00
57,00
61,00
65,00

Softshell

96% polyester, 4% elastane. Jacket, softshell, two-layer, microfleece, 2 side pockets with zipper. 280 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
68,00
70,00
72,00
74,00
76,00
WIDTH
54,00
57,00
60,00
62,00
65,00

Activity Softshell Jacket

93% polyester, 7% elastane. Jacket, softshell, membrane, TPU breathable. Inner micro fleece that is windproof, waterproof and breathable. Full front Zip with chin guard, 2 large front pockets with zip closure, 1 inner pocket, the inner part of the cuff elasticated opening with thumb, adjustable hem, zipped opening in the underarm for ventilation. 320 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
69,00
71,00
73,00
75,00
77,00
WIDTH
55,00
57,00
59,00
61,00
63,00

Ladies Premium Hooded Sweat Jacket

70% cotton 30% polyester. Sweatshirt with set-in sleeves set-in, front kangaroo pocket, hood with drawstring tone-on-tone, brushed internally, the structure with the side seams. (30/94: 260 g/m2).


280 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
62,00
63,50
65,00
66,50
68,00
69,50
WIDTH
46,00
48,50
51,00
53,50
56,00
58,50

Premium Hooded Sweat Jacket

70% cotton, 30% polyester. Sweatshirt with set-in sleeves set-in, drawstring solid color, front kangaroo pocket, concealed zip to facilitate printing, brushed internally, the structure with the side seams.


280 g/m2 / Classic Fit.


MEASURE
S
M
L
XL
XXL
HEIGHT
67,00
70,00
73,00
76,00
79,00
WIDTH
52,00
56,00
60,00
64,00
68,00

Varsity Jacket

80% cotton, 20% polyester. Sweatshirt with set-in sleeves set-in contrasting colour. The neck, cuffs and bottom hem in jersey with contrasting stripes. Tape reinforcement at the neck, pockets in a contrasting color, structure with the side seams.


330 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
62,00
65,00
68,00
71,00
74,00
77,00
WIDTH
44,00
48,00
52,00
56,00
60,00
64,00

Hooded Full Zip

70% combed cotton, 30% polyester. Sweatshirt with hood double-layer, brushed internally,sleeves set-in, zipper tone-on-tone covered, kangaroo pockets, bottom hem and cuffs in rib, with a bust tubular. Label strappabile.


280 g/m2 / Classic Fit.


MEASURE
XS
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
70,00
72,00
74,00
WIDTH
50,00
53,00
56,00
59,00
60,00
63,00

Stage 2 doors with PVC rubberised Tam, inside 2 pockets on the cover + 2 bags welded at the center, a portacard 2 places to the left and the other double door folding to the right. Customizable with your logo!Material: PVC TAM RubberSize: 10 x h13 cmCustomizable Area: 9 x 12 cm approx max

portacards
2 pockets
provided on whole leaves from 4 with perforations for separation
Material: PVCSize: 6 cm,2x9,5 ac (closed)
Customizable Area: 4,5 x 8 cm approx maxPlease note: the price includes the customization in single-sided

sachet portacards
1 pocket with opening long side
provided on full sheet 6 with perforations for the separation
Material: PVCSize: cm cm 10x7 ca
Customizable Area: 8 x 5 cm approx maxPlease note: the price includes the customization in single-sided

cases
6 pockets
Material: PVCDimensions: 7.5 cm x 10.3 ca (closed)
Customizable Area: 6 x 8 cm approx maxPlease note: the price includes the customization in single-sided

portapatente
portacards
3 doors
Material: PVCSize: 5 cm,5xh9,5 ac (closed)
Customizable Area: 4,5 x 8 cm approx maxPlease note: the price includes the customization in single-sided

portapatente
portacards
3 doors
Material: TAMDimensions: 6.5 cm x 9.5 ca (closed)
Customizable Area: 5 x 8 cm approx maxPlease note: the price includes the customization in single-sided

Card carriers, ABS frosty
contains a single card
Material: PlasticDimensions: 8.5 x 5.5 x 0.4 cm
Location choice and a customizable area:
PAD printing - front high, 40 x 11 mm max
DIGITAL DIRECT - the front high, 40 x 11 mm max
Please note: the price includes the customization in single-sided

Case credit card holder RFID
designed to block RFID readers from scanning data bank
Material: aluminum Foil / PSDimensions: 9.0 x 6 x 0.4 cmWeight: 16 gr
Location choice and a customizable area:
PAD printing - front or rear, 50 x 35 mm
DIGITAL DIRECT - front or rear, 60 x 50 mm
Please note: the price includes the customization in single-sided

RFID credit card holder, several interior compartments, designed to block RFID readers from scanning bank data (anti-skimming), in leather.
Size:10.2 x 7.3 x 0.6 cmMaterial: Fake SkinWeight:18 gramsCertificates: Cadmium, AZO Dyes/Amines, Formaldehyde, Chromium VI, Dimethyl Fumarate, RFID access control
Choosing location and print area:
TAMPOGRAFIA - front, 45 x 35 mm

RFID wallet, transparent interior compartment, credit card pockets, designed to block readers from scanning bank data (anti-skimming), in leather.
Size:11.5 x 7.1 x 0.5 cmMaterial: SkinWeight:35gCertificates: Cadmium, PAHs, Phthalates, AZO Dyes/Amines, Formaldehyde, Chromium VI, Dimethyl Fumarate, RFID access control
Choosing location and print area:
TAMPOGRAFIA - front or back, 45 x 35 mm

time disc mini
with the wheel hard cardboard
provided on full sheet 8 with perforations for separation
Material: pvc + adhesive
Dimensions (cm): 7 cm,3x11,5 caCustomizable Area:
the upper band of 6.5 x 2 cm ( visible from the outside of the car )
front door parking disc 6.5 x 2.5 cm ( visible from the inside of the car )
* the price includes the customization visible from the inside and from the outside of the car

time disc maxi
transparent housing
white front ( can be customized ) and the back blue
Material: pvc and carton
Dimensions (cm): cm 11,5 x 15 caCustomizable Area: 9 x 2.8 cm ( personalization is done on the bag, on the white side of the time disc ).

time disc multi-function
raschiaghiaccio
rubber spatula
back with the token for the trolley pull-out
gauge wear on the tread, winter/summer
Material: pvc + plastic
Dimensions (cm): 12 cm x 15.5 caCustomizable Area: on the back, 9 x 9 cm

sticky time disc with pocket and time disc in wheel
supplied disassembled
more pocket always in with side opening for ticket insertion
Material: PVC and Paper
Size (cm): 14 x h 11.5 c.Customizable area*:
top band 14 x 1.5 cm (visible from outside the car)
4.5 x 6 cm hourly disc door front (visible from inside the car)
* price includes customization visible from inside and outside the 1-color car

Lanyard polyester with safety lock, with plate, pvc, 2 moschettoncini metal, 1 carabiner hook for mobile phone.
Material: Metal / Nylon / PVC / Plastic / PolyesterWeight: 13 grCertificates: Cadmium, PAHs, Phtalates, AZO Dyes/Amines, Formaldehyde, ISO105-X12:2001 ISO 105-E04-2008, Technical data, BSCISize: 50 x 2 x 0.5 cm
Location choice and print customizable area:
PAD printing - the nameplate on the front, 35 x 7 mm

Keyring house, with tape measure 2 meters, ABS
Material: ABS - stainless SteelWeight: 27 gr
Certificates: Cadmium, PAHs, BSCISize: 5.2 x 4.6 x 1.3 cm
Location choice and print customizable area:
PAD - on back, 30 x 20 mm

Keychain with metro tailoring 150 cm, ABS.
Material: Metal - ABSWeight: 25 gr
Certificates: Cadmium, PAHs, Phtalates, SVHC'sDimensions: 6.8 x 4.8 x 2.0 cm
Location choice and print customizable area:
PAD - top, 35 x 25 mm
PAD - rear, 30 x 10 mm
DIGITAL DIRECT - top, 45 x 20 mm

Keyring " OK " in PE, with tape measure 1 meter
Material: Metal / PEWeight: 16 grCertificate: Cadmium, Nickel, PAHs, Phtalates
Dimensions: 6 x 4.1 x 1.1 cm
Location choice and print customizable area:
PAD printing - front or rear, 25 x 20 mm

Key ring in transparent PET with spirit level
Material: Metal / PET / Oil-solubleWeight: 13 grCertificate: Cadmium, Nickel, PAHs, Phtalates
Size: 4.4 x 1.5 x 1.5 cm
Location choice and print customizable area:
PAD - top, 30 x 10 mm

Keychain OK ABS capacitive (compatible on touch screens, with white LED light, batteries included.
Material: ABS / Steel / Iron / LEDWeight: 14 grCertificate: PAHs, RoHS, Battery directive 2006/66/EC, EMC, D. or.C EMC/EC, IEC 62471
Size: 5.9 x 5.2 x 1.2 cm
Location choice and print customizable area:
PAD printing - front, Ø 20 mm
DIGITAL DIRECT - front, Ø 20 mm

Stress-the shape of a smile with keychain, PU
Material: Steel / PUWeight: 10 grCertificates: EN71-3, Cadmium, PAHs, EN71-1, Phtalates, EN71-2
Size: 3.9 x 4.5 cm
Location choice and print customizable area:
PAD - rear, Ø 20 mm

Keychain shape sailing boat, EVA.
Material: Steel / EVAWeight: 6 gr
Certificate: Cadmium, Nickel, PAHs, PhtalatesSize: 17.5 x 5.5 x 1.0 cm
Location choice and print customizable area:
PAD printing - front or rear, 25 x 30 mm

Keychain in metal and wood with stainless steel ring, individually packed in polybag
Material: Beech Wood / Alloy / ZincWeight: 30 grCertificate: Cadmium, Nickel, PCP
Size: 5.7 x 2.4 x 0.7 cm
Location choice and print customizable area:
PAD printing - front, 30 x 15 mm
LASER - front, 30 x 15 mm

Keychain wooden, metal ring
Material: Wood / MetalWeight: 16 grCertificate: Cadmium, Nickel, PCP
Size: 5.7 x 2.4 x 0.7 cm
Location choice and print customizable area:
LASER - front or rear, 25 x 20 mm

Embroidered Patch/Patch for your Vespa Club. Fully customizable with your graphics or your logo!You may be interested in: Patches/Patches HD Microfabrics "thermoadhesive"
Application: Thermoadhesive. ( applicable with iron or heat presses at 160 ° for 30 seconds )You may also be interested in Embroidered Patches / Patches "to be sewn"
Dimensions: 8 x 8 cm. Area available for customization: 8 x 8 cm.Need a different size? Customer service
Shape: Round, square or completely customized (eg: classic shape of the V.C Italia logo).
Colors: Maximum 9
Order min. 100 copies.Supply: 6/12 working days depending on quantity/period
Utilization: It can be heat-sealed or sewn on sweatshirts, hats, vests, backpacks and / or fabrics in general.

Embroidered Patch/Patch for your Vespa Club. Fully customizable with your graphics or your logo!You may be interested in: Patches/Patches HD Microfabrics "thermoadhesive"
Application: Embroidered patch to be sewn on the garment.You may also be interested in Patches/Patches Embroidered "thermoadhesive"
Dimensions: 8 x 8 cm. Area available for customization: 8 x 8 cm.Need a different size? Customer service
Shape: Round, square or completely customized (eg: classic shape of the V.C Italia logo).
Colors: Maximum 9
Order min. 100 copies.Supply: 8/16 working days depending on quantity/period
Utilization: It can be sewn on sweatshirts, hats, vests, backpacks and / or fabrics in general.

Custom 2D rubber/pvc keychain (image is just an example)
Article complies with all applicable safety regulations
Rubber thickness 4 mm
Classic metal key ring
Dimensions: 40 x 40 mm maxShape: Fully customizableCustomization: 4 colors maximum, on 1 side. ( for more colors, contact customer service )
Delivery times and samples:Full production will begin after the approval of the draft, unless specifically requested for preventive sample production.All costs related to sample changes and order cancellation will be invoiced.
Complete production up to 1.000/2.500/10.000 pcs: respectively approx. 12/15/20 working days + Air transport approx. 9-12 days.

Custom 2D rubber/pvc keychain (image is just an example)
Article complies with all applicable safety regulations
Rubber thickness 4 mm
Classic metal key ring
Dimensions: 40 x 40 mm maxShape: Fully customizableCustomization: 4 colors maximum, on 1 side. ( for more colors, contact customer service )
Delivery times and samples:Full production will begin after the approval of the draft, unless specifically requested for preventive sample production.All costs related to sample changes and order cancellation will be invoiced.
Complete production up to 1.000/2.500/10.000 pcs: respectively approx. 12/15/20 working days + Air transport approx. 9-12 days.

Custom 2D rubber/pvc keychain (image is just an example)
Article complies with all applicable safety regulations
Rubber thickness 4 mm
Classic metal key ring
Dimensions: 40 x 40 mm maxShape: Fully customizableCustomization: 4 colors maximum, on 1 side. ( for more colors, contact customer service )
Delivery times and samples:Full production will begin after the approval of the draft, unless specifically requested for preventive sample production.All costs related to sample changes and order cancellation will be invoiced.
Complete production up to 1.000/2.500/10.000 pcs: respectively approx. 12/15/20 working days + Air transport approx. 9-12 days.

Adhesive labels shaped with the logo of your Vespa Club.Attention: The image is for illustrative purposes!Material characteristics
Certification of reaction to fire (B-S2-D0).
Film thickness: 90micron | Glossy or Matt Finish
The Base film is white, with excellent printability and flatness.
Customization
Printing Eco-Solvent color HD.
Life on the outside: 24/36 months
Length inside: indefinite
Cutting
Provided with means of cutting ( to facilitate the spellicolatura )
Supplied in planks ( 32/64 x 100/130cm )
Print File?Just a file of good quality in 1:1 scale...we take care of the layout of the dashboard!Might interest you: Instructions for the preparation of the file

Briefcase made of rubber and stitched with flap oblique, button nikelato closure and white stitching. Customizable with your logo!Material: PVC TAM RubberSize: 14.5 x h17 cm ( closed )Customizable Area: 12 x 6 cm approx max

Required in 600D polyester with carrying handle and zip
Ideal as a tool bag for Vespa
Roomy, waterproof
Material: 600D Polyester | RaincoatDimensions: 26 x 14 x 11 cmWeight: 95 gr
Choice of position and customizable area (mm):Attention: the customization must be selected in the "product customization" box
COLOUR - iron-on colour, front: max 150 x 70 mm
1 COLOUR - silk-screen printing, front: max 150 x 70 mm

Sewn-in document holder, foldable for easy transport and space optimizationMaterial: PVC TAM Rubberized CanvasDimensions: 14.5 x 18 cm
Choice of position and customizable area (cm):Attention: the customization must be selected in the "product customization" box
1 COLOUR - front bottom, 120 x 120 mm
Packaging: available in multiples of 50 pieces

Stainless steel flask, matte finish, 100 ml capacity
Material: Metal, Stainless SteelWeight: 84 grDimensions: 7 x 2 x 11.5 cm
Customizable position and area choice (mm):Attention: the customization must be selected in the "product customization" box
1 COLOUR - TAMPER - front, 40 x 30 mm max
LB LASER ENGRAVING - front, 30 x 30 mm max
LD LASER ENGRAVING - front, 50 x 30 mm max
LASER ENGRAVING LE - front, 50 x 65 mm max
LF LASER ENGRAVING - front, 50 x 90 mm max

304 stainless steel flask with bamboo outer finish, 175ml capacity
Material: Wood, Plastic, 201 Stainless SteelWeight: 90 grDimensions: 9.5 x 2 x 10.5 cm
Customizable position and area choice (mm):Attention: the customization must be selected in the "product customization" box
1 COLOUR - PRINTING - front, 50 x 35 mm
LB LASER ENGRAVING - front, 35 x 20 mm max
LD LASER ENGRAVING - front, 50 x 30 mm max
LASER ENGRAVING LE - front, 50 x 65 mm max

ceramic cup
single box with cardboard window
capacity 0.32L - 320 ml
printing technique: sublimatic
Material: Ceramics and Cardboard
Size (cm): Ø 8 x h9.5 caCustomizable area:
sublimmatic all around - 20 x 8.5 cm ca
sublimmatic to the right or left of the handle - 7 x 8.5 cm ca

Ball pen on the AS, body and rubber grip, colored, refill black
Material: AS / RubberWeight: 8 grCertificates: EN71-3, Cadmium, PAHs, Phtalates, Safety Data Sheet (SDS)
Dimensions (cm): 14.5 x 1.5 cmLocation choice and a customizable area (mm):
PAD printing - close the clip, write to the left or right, 30 x 7 mm
DIGITAL PRINTING - close the clip, write, right, 30 x 7 mm

Open balaclava, ultra-thermal and breathable fabric, flat seams, machine washable.
Also ideal as a motorcycle / scooter / vespa underhelmet
Material: 100% polyester and microfleece
Choice of position and customizable area (cm):Attention: the customization must be selected in the box "product customization"
EMBROIDERY - front, neck height, 95 x 95 mm max
THERMOADHESIVE - front, neck height, 120 x 120 mm max

document holder for car and motorcycle
flap closure
printing technique recommended: silk-screen
Material: PVC TAM RubberSize: 13 x 16.5 cm ( closed )Customizable Area: 12 x 8 cm approx max ( on lower front )

Hooded softshell BS Black Spider
96% polyester, 4% elastane. 3-layer softshell jacket, hood with plastic latches, black eyelets and lanyard. Two side pockets with zip, a chest pocket with zip, plastic zip puller, adjustable cuffs with velcro, microfleece interior. Bottom edge with adjustable lanyard with latches. Water resistance 8000 mm, breathability 1000 gr/m2.Weight: 340 g/m2
SIZESMLXL XXL3XLHEIGHT
68
70
72
74
76
78
WIDTH
54
57
60
62
65
68

Motorcycle Vest100% polyester. Vest biker, high visibility, certified according to EN ISO 20471:2013 + A1:By 2016, the Oeko-Tex® Standard 100. Elastic bands on the inside of the vest to the stability of the fabric at high speed, flap with velcro closure to protect the zipper, two bands of reflective around the body, two bands of reflective on the shoulders, the length of the reflective properties in accordance with EN for 25 wash cycles at 40°C. individually Packaged in a convenient bag of polyethylene.MEASURELXLXXLHEIGHT64,0067,0069,00WIDTH56,0060,0065,00

Softshell

96% polyester, 4% elastane. Jacket, softshell, two-layer, microfleece, 2 side pockets with zipper. 280 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
68,00
70,00
72,00
74,00
76,00
WIDTH
54,00
57,00
60,00
62,00
65,00

Men's Zip-Off Softshell Jacket

100% polyester. Jacket in softshell with 3-layer fabric, membrane, TPU, windproof and water-repellent (water column 5,000 mm), breathable and permeable to vapour. High neck, contrast piping on the front, on the back and on the sleeves. Zip hidden front, reflective detail on shoulders, back, and sleeves. two side pockets with zip, one internal pocket, sleeve pocket with zip reflective. Detachable sleeves. 230 g/m2


MEASURE
S
M
L
XL
XXL
HEIGHT
68,00
70,00
72,00
74,00
76,00
WIDTH
53,00
56,00
60,00
64,00
68,00

Men's Promo Jacket Softshell

100% polyester. Jacket, softshell, two-layer, water-repellent, windproof and breathable. The inner side of soft microfleece, front full zip with chin guard. 2 side pockets with zip, 2 inside pockets, elastic cuffs. 280 g/m2.


MEASURE
S
M
L
XL
XXL
HEIGHT
70,00
72,00
74,00
76,00
78,00
WIDTH
54,00
57,00
61,00
65,00
69,00

Ladies' Promo Softshell Jacket

100% polyester. Jacket, softshell, two-layer, water-repellent, windproof and breathable, inner part in soft microfleece, front zip with chin guard. 2 side pockets with zip, 2 inside pockets, elastic cuffs, slightly tight-fitting. 280 g/m2.



MEASURE
S
M
L
XL
XXL
HEIGHT
64,00
66,00
68,00
69,00
71,00
WIDTH
50,00
54,00
57,00
61,00
65,00

Evolution T 100% cotton ring-spun single jersey.
Short sleeve T-shirt, low collar with double needle stitching, sweat guard, structure with tubular torso. Tearable label.
Col GY: 85% cot. 15% visc. 150 g/m2 / Classic Fit
SIZEXSSMLXL XXL3XLHEIGHT
67
69
71
73
75
77
79
WIDTH
46
48
50
54
58
62
66

Evolution T White


100% cotton ring-spun single jersey. Short sleeve T-shirt, low collar with double needle stitching, sweat shield, tubular torso structure. Tearable label. With GY: 85% cot. 15% visc. 145 g/m2 / Classic Fit



MEASURE
S
M
L
XL
XXL
3XL
HEIGHT
69,00
71,00
73,00
75,00
77,00
79,00
WIDTH
48,00
50,00
54,00
58,00
62,00
66,00

Valueweight T

100% Belcoro ringed cotton yarn. Set-in short sleeve T-shirt, collar with cot./Lycra® rib and inner webbing for added comfort, tubular structure bust. Col. 93: 99% cot. 1% pol. Col. 94: 97% cot. 3% pol. Col. VH, RX, R6, VF, HD: 50% cot. 50% pol. (Col. 30: 160 g/m²).
165 g/m2 / Classic Fit.


MEASURE
S
M
L
XL
XXL
HEIGHT
69,50
72,00
74,50
77,00
78,50
WIDTH
48,50
53,50
56,00
61,00
66,00

Valueweight T White

100% cotton spun with Belcoro rings. T-shirt short sleeve set-in, collar with rib in cot./Lycra® and inner webbing for greater comfort, bust tubular structure. 160 g/m2 / Classic Fit.

MEASURE
S
M
L
XL
XXL
HEIGHT
69,50
72,00
74,50
77,00
78,50
WIDTH
48,50
53,50
56,00
61,00
66,00

Corkscrew waiter stainless steel
Material: Stainless Steel 420Size: 11.0 x 3.0 x 1.5 cmWeight: 52 grCertificates: Cadmium, SVHC's, Foodcontact
Choice location and print area:
PAD printing - front or rear, 35 x 7 mm
LASER - front or rear, 35 x 7 mm

Bottle opener elegant arc-shaped, in stainless steel
Material: Stainless SteelSize: 18.3 x 4.3 x 1.0 cmWeight: 78 grCertificates: Cadmium
Choice location and print area:
PAD - top, 50 x 25 mm
PAD - bottom, 40 x 25 mm
LASER - top, 40 x 15 mm

Corkscrew waiter stainless steel
Material: Plastic and Stainless SteelDimensions: 12.0 x 3.0 x 1.2 cmWeight: 79 grCertificate: Cadmium, Nickel, SVHC's, Extractable Heavy Metals
Choice location and print area:
PAD printing - on the side, 40 x 6 mm
LASER - on the side, 40 x 6 mm

Corkscrew from waiter, ergonomic shape, stainless steel
Material: Stainless Steel and PlasticDimensions: 12.5 x 2.5 x 1.5 cmWeight: 55 grCertificates: Cadmium, SVHC's, Overall/Global Migration, Foodcontact
Choice location and print area:
PAD - top, 35 x 7 mm
PAD printing - on the side, 12 x 8 mm
LASER - on the side, 12 x 8 mm
LASER - top, 25 x 7 mm

Set the wine in two accessories in stainless steel, composed of corkscrew to waiter and wine bottle stopper with spout pourer.
Material: Stainless Steel / 201 Stainless Steel / EVASize: 14,0 x 10,0 x 2.9 cmWeight: 122 grCertificates: Cadmium, PAHs, Phtalates, AZO Dyes/Amines, SVHC's, Formaldehyde, PCP, BPA, Food Safe
Choice location and print area on the corkscrew
PAD printing - front or rear, 35 x 7 mm
LASER - front or rear, 35 x 7 mm
Gift-wrapping:
PAD - on box, 50 x 30 mm
Silk - screen printing- packaging, 100 x 50 mm

Set the wine in four accessories in stainless steel, consisting of stopper, corkscrew, ring, drip, spout with stopper gift pack ABS
Material: ABS / Stainless Steel 201Dimensions: 5.0 x 17.0 cmWeight: 310 grCertificates: Cadmium, PAHs, Phtalates, AZO Dyes/Amines, SVHC's, Formaldehyde, PCP, BPA, Food Safe
Choice location and print area on the corkscrew:
LASER - front or rear, 35 x 7 mm
Gift-wrapping:
PAD - top, 60 x 35 mm
PAD printing - part side, 35 x 7 mm
Silk screen - top, 80 x 35 mm

Cap for bottles, in stainless steel with a silicone seal
Material: 430 Stainless Steel / SiliconeDimensions: 4.0 x 6.0 cmWeight: 54 gramsCertificates: Cadmium, PAHs, Phtalates, SVHC's, BPA, Food Safe
Choice location and print area:
LASER - top, Ø 23mm
The LASER - side, 10 x 15 mm

Wheel for pizza, includes function bottle opener, made of PS
Material: PSSize: 13.0 x 6.2 x 1.0 cmWeight: 30 grCertificates: Phtalates, SVHC's, BPA, Food Safe
Choice location and print area:
PAD printing - front or rear, 40 x 25 mm
DIGITAL DIRECT - the front or the rear, 40 x 25 mm

Bottle opener with bottle cap function.
Material: Plastic & MetalDimensions: 9.1 x 4.1 x 1.1 cmWeight: 21 gr
Certificates: Cadmium, PAHs, Phthalates
Choice of position and customizable area (cm):Attention: the customization must be selected in the box "product customization"
DIGITAL DIRECT - COLOR, top, 30 x 35 mm

Bottle opener in beech wood and stainless steel.
Material: Stainless Steel / Beech / Wood / MetalDimensions: 6.7 x 4 x 0.8 cmWeight: 30 grCertificates: Cadmium, PCP
Choice of position and customizable area (cm):Attention: the customization must be selected in the box "product customization"
1 or 2 COLORS STAMP PRINTING, top or bottom, 30 x 20 mm
LASER ENGRAVING, top or bottom, 30 x 20 mm

DTG Cotton Bib Apron


100% Cotton Twill heavy. Apron in durable cotton with a bib. Washable at 60 degrees. Perfect fabric for digital printing.


240 g/m2

Measures: 60 x 87 cm

Children's Apron

65% polyester 35% cotton. Apron with bib in cotton twill, no pocket, and a snare to the neck with adjustable buckle closure, rear lacing with lace-up to 50 cm. Washable in washing-machine at 60° and 85° industrial washing machine.


195 g/m2



Measures: 53 x 43 cm

Water Proof Bib Apron


100% polyester coated in polyurethane. The apron is one-size waterproof fabric with adjustable buckle at neck and lacing at the back with lace-up fabric 90 cm.


110 g/m2



Measures: 72 x 86 cm

Apron With Bib

80% polyester, 20% cotton. Apron with bib with lace sliding, large central pocket with three separate compartments. Washable at 40°C.


205 g/m2



Measures: 68 x 84 cm

Basic Apron

65% polyester, 35% cotton. The apron comfortable and snug, without pocket with a long strap. Washable at 40°C. (Col. WH, NA: 100% cot.)


195 g/m2



Measures: 68 x 84 cm

Apron Panamone With Bib

100% cotton. Apron with bib, and a snare slide, large central pocket with three separate compartments. Washable at 40°C.


240 g/m2

Made in Italy



Measures: 68 x 84 cm

Annex Oxford Bib Apron


100% Oxford cotton effect yarn. Apron with inserts in fake leather. Crew neck in eco-leather with adjustable buckle and contrast stitching, the buttonhole for the front-apron and side tabs in faux leather with contrast stitching, central pocket, double eyelet closure at the waist.


220 g/m2



Measures: 72 x 86 cm

Calibre Heavy Cotton Canvas Pocket Apron

100% cotton canvas heavy. Apron made of canvas, pocket with 4 compartments with contrast stitching, lace at the neck with eyelet oversized, heavy and durable.


320 g/m2



Measures: 72 x 86 cm

Underground Utility Hip Apron


100% cotton canvas heavy. Apron in canvas with a pocket of jeans contrasting and zip closure, lace on the waist hook and eye, rounded hem on the bottom. Denim: 70% cot. 30% pol. Twill.


320 g/m2




Measures: 72 x 86 cm

Bistro

65% polyester, 35% cotton. Apron-style bar with side pocket and long strap. Product of Italy. Washable at 40°C. (With WH: 100% cot.)


195 g/m2


Made in Italy





Measures: 68 x 58 cm

TECHNICAL POLO
WEIGHT: 180 gr/m²
COMPOSITION: 65% cotton, 35% polyester with a piqué effect.
SPECIFICATIONS:
High visibility reflective strips on sleeves.
Contrasting underarm inserts and collar.
Reinforced straps.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

TECHNICAL T-SHIRT
WEIGHT: 170 gr/m²
COMPOSITION: 50% cotton, 50% polyester with piqué effect.
SPECIFICATIONS:
High visibility reflective strips on sleeves.
Reinforced straps.
Contrasting underarm and waist inserts.
Complies with EN ISO 13688:2022 - CAT.1.Browse the product images for the size guide.

TECH LIGHT VEST
WEIGHT: 240 g/m²
COMPOSITION: 90% nylon - 10% elastane
FEATURES:
Reinforced inserts on the shoulders made of anti-abrasion material.
Coated and waterproof central zipper.
High visibility reflective strips on the back.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

TECHNICAL SOFT-SHELL WEIGHT: 330 gr/m²
COMPOSITION: Outer 93% polyester, 7% spandex Inner 100% polyester (polar fleece)
SPECIFIC:
Reinforcement inserts on shoulders and sleeves in anti-abrasion material.
High visibility reflective strips on the sleeves.
Removable and packable hood with double adjustment.
Elasticated cuffs and hem.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

TECHNICAL WINDPROOF JACKET
WEIGHT: 240 gr/m²
COMPOSITION: 90% nylon – 10% spandex
SPECIFICATIONS:
Sleeves reinforced with anti-abrasion inserts and high-visibility reflective strips.
Coated and waterproof central zipper.
Pocket with zip closure and high visibility puller on the left sleeve.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

TECHNICAL FULL ZIP HOODED SWEATSHIRT
WEIGHT: 280 gr/m²
COMPOSITION: 80% cotton - 20% polyester
SPECIFICATIONS:
Sleeves reinforced with anti-abrasion inserts and high-visibility reflective strips.
Reinforcement inserts on the shoulders.
Integrated adjustable hood with contrasting interior.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

RUNNING-STYLE SAFETY FOOTWEAR COMPLIANT WITH THE NEW EN ISO 20345:2022. SEAMLESS UPPER IN ULTRA-BREATHABLE 3D FABRIC, ANTI-ABRASION TPU REINFORCEMENTS AND 3D HF DETAILS. EVA MIDSOLE AND "FO+HRO" RUBBER TREAD. LIGHT AND SPORTY, TO ENHANCE THE DYNAMISM OF THE WEARER.
UPPER: Seamless in breathable micro-perforated 3D fabric, anti-abrasion tpu reinforcements and 3D HF details.
INNER LINING: breathable micro-perforated 3D fabric.
REMOVABLE INSOLE: antistatic low-density polyurethane with ergonomic thermoforming.
ANTI-PERFORATION INSOLE: in perforation-zero textile fiber.
TOE CAP: in non-magnetic, insulating composite, resistant to 200J.
ANTISTATIC NON-SLIP SOLE: EVA midsole and FO+HRO nitrile rubber tread with energy absorption on the heel. TWIST sole with tread whose Twist Tech zigzag design favors flex, ensuring maximum grip in any support situation.WARNING: DESIGN AND SAVE NOT APPLICABLE FOR THIS PRODUCT.

RUNNING-STYLE SAFETY FOOTWEAR COMPLIANT WITH THE NEW EN ISO 20345:2022. SEAMLESS UPPER IN ULTRA-BREATHABLE 3D FABRIC, ANTI-ABRASION TPU REINFORCEMENTS AND 3D HF DETAILS. EVA MIDSOLE AND "FO+HRO" RUBBER TREAD. LIGHT AND SPORTY, TO ENHANCE THE DYNAMISM OF THE WEARER.
UPPER: Seamless in breathable micro-perforated 3D fabric, anti-abrasion tpu reinforcements and 3D HF details.
INNER LINING: breathable micro-perforated 3D fabric.
REMOVABLE INSOLE: antistatic low-density polyurethane with ergonomic thermoforming.
ANTI-PERFORATION INSOLE: in perforation-zero textile fiber.
TOE CAP: in non-magnetic, insulating composite, resistant to 200J.
ANTISTATIC NON-SLIP SOLE: EVA midsole and FO+HRO nitrile rubber tread with energy absorption on the heel. TWIST sole with tread whose Twist Tech zigzag design favors flex, ensuring maximum grip in any support situation.
WARNING: DESIGN AND SAVE NOT APPLICABLE FOR THIS PRODUCT.

RUNNING-STYLE SAFETY FOOTWEAR.SEAMLESS UPPER IN WATER-RESISTANT RIP-STOP FABRIC, ANTI-ABRASION TPU REINFORCEMENTS AND 3D HF DETAILS.EVA MIDSOLE AND "FO+HRO" RUBBER TREAD.LIGHTWEIGHT, VERSATILE AND DURABLE, THEY ARE READY FOR ANY CHALLENGE.
THE SPECIAL SUPER COMFORT EVA MIDSOLE GIVES AN UNPARALLELED CUSHIONING EFFECT, INCREASING THE ELASTIC ENERGY RETURNED AND REDUCING FATIGUE AT THE END OF THE DAY. IMPULSE: THE WORK SHOE THAT MAKES YOU FEEL GOOD.
UPPER: seamless in water-resistant RIP-STOP fabric, anti-abrasion TPU reinforcements and 3D HF details. Second pair of colored laces included.
INNER LINING: breathable micro-perforated 3D fabric.
REMOVABLE INSOLE: antistatic low-density polyurethane with ergonomic thermoforming.
ANTI-PERFORATION INSOLE: ultra-light puncture-zero (PS) textile fiber.
TOE CAP: non-magnetic, insulating fiberglass, resistant to 200J.
ANTISTATIC NON-SLIP SOLE: super-comfort EVA midsole with high energy absorption and FO+HRO nitrile rubber tread.
WARNING: DESIGN AND SAVE NOT APPLICABLE FOR THIS PRODUCT.

FULL ZIP TECHNICAL SWEATSHIRT
WEIGHT: 260 gr/m²
COMPOSITION: 80% cotton – 20% polyester
SPECIFIC:
Sleeves reinforced with anti-abrasion inserts and high-visibility reflective strips.
Reinforcement inserts on the harness and shoulders.
Central zipper with ultra-smooth visible chain.
Side and sleeve pockets with reversed zip closure.
Complies with EN ISO 13688:2022 - CAT.1.
Browse the product images for the size guide.

STANDARD: EN ISO 20345:2011
UPPER: TECHSHELL, innovative fabric very tenacious, resistant to abrasion and tearing, water-repellent and breathable
INNER LINING: SANY-DRY® 100% polyester, three-dimensional, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: FOOT-PAD, extremely soft and comfortable. Thanks to the very low density polyurethane, it molds itself, allowing a correct distribution of body weight and giving an immediate feeling of comfort. The high absorption of impact shock is achieved with a highly resilient material and a perfect bulge in the center of the heel
SOLE: polyurethane/TPU with recycled rubber granules
TOE CAP: ALUMINIUM 200 J
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 11 Mondopoint
PERFORMANCE - TECHNICAL PLUSES: DGUV 112 - 191, ECO Friendly
SIZES: 35-48 (EU), 2-13 (UK)

STANDARD: EN ISO 20345:2011
UPPER: nubuck Water-repellent Pull-up
OUTER LINING: breathable synthetic
INNER LINING: TEXELLE 100% polyamide, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: EVANIT, with special EVA and nitrile compound, with high bearing capacity and variable thickness (12mm - 8mm - 3.8mm). Thermoformed, anatomical, perforated and covered in highly breathable fabric. Antistatic thanks to a specific surface treatment and seams made with conductive yarns
SOLE: Polyurethane/TPU
TOE CAP: 200 J resistant steel
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 10 Mondopoint (size 36-39) - 11 Mondopoint (size 40-48)
SIZES: 36-48 (EU), 3-13 (UK)

STANDARD: EN ISO 20345:2011
UPPER: BREATEX fabric with 3D weaving, highly breathable and MICROTECH
OUTER LINING: BREATEX fabric, highly breathable
INNER LINING: SANY-DRY® 100% polyester, three-dimensional, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: FOOT-PAD, extremely soft and comfortable. Thanks to the very low density polyurethane, it molds itself, allowing a correct distribution of body weight and giving an immediate feeling of comfort. The high absorption of impact shock is achieved with a highly resilient material and a perfect bulge in the center of the heel
SOLE: polyurethane/TPU with recycled rubber granules
TOE CAP: ALUMINIUM 200 J
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 11 Mondopoint
PLUS: abrasion-resistant leather toe protection

STANDARD: EN ISO 20345:2011
UPPER: perforated suede
OUTER LINING: breathable fabric
INNER LINING: TEXELLE 100% polyamide, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: EVANIT, with special EVA and nitrile compound, with high bearing capacity and variable thickness (12mm - 8mm - 3.8mm). Thermoformed, anatomical, perforated and covered in highly breathable fabric. Antistatic thanks to a specific surface treatment and seams made with conductive yarns
SOLE: dual-density polyurethane
TOE CAP: 200 J resistant steel
FIT: 11 Mondopoint
SIZES: 36-48 (EU), 3-13 (UK)

STANDARD: EN ISO 20345:2011
UPPER: TECHSHELL, innovative fabric very tenacious, resistant to abrasion and tearing, water-repellent and breathable
INNER LINING: SANY-DRY® 100% polyester, three-dimensional, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: FOOT-PAD, extremely soft and comfortable. Thanks to the very low density polyurethane, it molds itself, allowing a correct distribution of body weight and giving an immediate feeling of comfort. The high absorption of impact shock is achieved with a highly resilient material and a perfect bulge in the center of the heel
SOLE: Polyurethane/TPU
TOE CAP: ALUMINIUM 200 J
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 11 Mondopoint
PLUS: TPU toe protection
PERFORMANCE - TECHNICAL PLUSES: DGUV 112 - 191, toe protection
WEIGHT: 490 g (size 42)

STANDARD: EN ISO 20345:2011
UPPER: perforated suede
OUTER LINING: highly breathable fabric
INNER LINING: SANY-DRY® 100% polyester, three-dimensional, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: FOOT-PAD, extremely soft and comfortable. Thanks to the very low density polyurethane, it molds itself, allowing a correct distribution of body weight and giving an immediate feeling of comfort. The high absorption of impact shock is achieved with a highly resilient material and a perfect bulge in the center of the heel
SOLE: Polyurethane/TPU
TOE CAP: ALUMINIUM 200 J
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 11 Mondopoint
PERFORMANCE - TECHNICAL PLUSES: DGUV 112 - 191, Italian Leather

STANDARD: EN ISO 20345:2011
UPPER: highly breathable fabric and nubuck-effect microfiber
INNER LINING: SANY-DRY® 100% polyester, three-dimensional, breathable, absorbent and deabsorbent, anti-abrasion
INSOLE: LIGHT FOAM, made of extremely soft and comfortable polyurethane foam. Perforated, antistatic, with an anatomical shape that embraces and supports the arch of the foot, covered in anti-abrasion fabric, it absorbs sweat leaving the foot always dry; ensures maximum comfort and absorption of impact energy
SOLE: Polyurethane/TPU
TOE CAP: FIBERGLASS CAP, non-metallic fiberglass resistant to 200 J
FOIL: Non-metallic APT Plate - Zero Perforation
FIT: 10 Mondopoint (size 38-39) - 11 Mondopoint (size 40-48)
PERFORMANCE - TECHNICAL PLUSES: DGUV 112 - 191, Metal Free
SIZES: 38-48 (EU), 5-13 (UK)

WATERPROOF TROUSERS IN 4 STRETCH FABRIC STRETCH HORIZONTALLY AND VERTICALLY FOR MAXIMUM COMFORT.
MATCH TG.: S42/44 M46/48 L50/52 XL54/56 XXL58/60 3XL62/64
Scroll down for the full description

LINEA_1: JEANS FUNCTIONAL
TYPE: trousers
DESCRIPTION: 1 tool pocket on left leg, 2 pockets on the front, 2 pockets on the back, hammer ring, good resistance to washing, good resistance to abrasion, ergonomic cut, ruler pocket, stretch fabric, triple stitching on areas subject to wear, adjustable waist, YKK® zip
COMPOSITION: 70% cotton - 27% polyester - 3% elastane
WEIGHT: 330 g/m²
COLOR: 00 blue
AREA OF USE: construction, logistics
GENDER: MEN
PERFORMANCE E PLUS: UNDETECTABLE BY METAL DETECTORS
SIZES: 44-64 ( EU )

Motorcycle Vest100% polyester. Vest biker, high visibility, certified according to EN ISO 20471:2013 + A1:By 2016, the Oeko-Tex® Standard 100. Elastic bands on the inside of the vest to the stability of the fabric at high speed, flap with velcro closure to protect the zipper, two bands of reflective around the body, two bands of reflective on the shoulders, the length of the reflective properties in accordance with EN for 25 wash cycles at 40°C. individually Packaged in a convenient bag of polyethylene.MEASURELXLXXLHEIGHT64,0067,0069,00WIDTH56,0060,0065,00

Safety Cargo Trousers
80% polyester 20% cotton twill. Pants with waist slightly elasticated with belt loops, a zip front with button, rear pockets, slit and zip on the front pockets, contrasting panels black, reinforcements on the stress points, reflective bands on the leg, side pocket, pockets for knee pads.
MEASURE
XS
S
M
L
XL
XXL
HEIGHT
81,00
81,00
81,00
81,00
81,00
81,00
WIDTH
33,50
36,00
38,50
41,00
43,50
46,00