preparation Guide, files, Banners,

How to paginate correctly the files for the printing of a banner ad

The following are guidelines to help you create a print file correctly.

If you still have doubts, please call our Customer service (also via WhatsApp)

Remember, the control of suitability of the file is included in the price. In any case, you will receive a draft graphic prepress by our operator.

The format of the File

You can send your file format .JPG, .PNG or PDF (not password protected).

Preparation of the file for the eye-letting

The eyelets in aluminum, have a diameter of 2.5 cm and are placed about 2 cm from the edge of the finished format. In the case of a reinforced perimeter on the same side, the grommets will be placed approximately 4 cm from the edge of the finished format.

In the case of strengthening the perimeter?

Do not place graphic elements to at least 6 cm from the edge of the file. This area will not be visible. It is recommended that you fill it with a color, to avoid white edges on the fold of the PVC.

In the case of a buttonhole?

Do not place graphic elements for at least 10 cm from the edge of the file. This area will not be visible. It is recommended that you fill it with a color, to avoid white edges on the fold of the PVC.

Colors

All files should be sent in CMYK (cyan, magenta, yellow, black) by assigning the colour profile Fogra 39. Images in RGB or PANTONE colors will be converted to automatic with a profile of the separation standard.

White

For these products is not provided for the printing of the white ink.

Optimal resolution

The optimal resolution of the file for printing is between 150 and 300 DPI.

Square Cut

If you choose the square cut cutting (square or rectangular) will follow the outline of the file.

Abundance and secure Area

Always leave plenty, of 0.1 cm per side. The distance of the text from the cutting line should be 0.5 cm.