Travel accessories

Fully customizable gym towel: allover in HD color on the entire surface.
Size: 50 × 100 cm
Material:
customizable front 100% polyester
back in soft terry 100% cotton | 400 gr
Customization: Sublimation HD color. 50 x 100 cm max.Directions: avoid writing too close to the edges and dark solid bottoms; Being a Velour cloth by raising it against the hair you would see the white background.
Supply: 15/20 working daysPackaging: minimum order 50 pcs

Soft fleece blanket 170-180 gr/m², equipped with handle case, front compartment
Material: Nylon / Polar Soft Cloth / Fleece 165 g/m2Weight: 325 grCertificates: Cadmium, PAHs, Phthalates, AZO Dyes/Amines, Formaldehyde, ISO105-X12:2001, BSCIDimensions: 162,0 x 125,0 x 0,1 cm
Choice of position and customizable area (mm):
SCREEN PRINTING - front, 100 x 40 mm
COLOR THERMOADHESIVE - front, 90 X 40 mm

Wireless Speaker in metal, includes cable, ac charging. 50 cm, buttons for rewind and forward, step in the various wireless modes, MP3 and off, contains the user manual in English, Dutch, German, Spanish and Italian.
Size: 5.0 x 6.0 cmMaterial: ABS / Iron / RubberBattery: 1 x Li-ion battery 450 mAhWeight: 210 grCertificate: PAHs, RoHS, Battery directive 2006/66/EC, EMC, EN60065 (LVD), EN 62479:2010, EN 300 328 (RED), D. or.C. RED, Test Setup & EUT Photographs, BSCI.
Location choice and a customizable area:
PAD printing - front or rear, 25 x 25 mm
LASER - front or rear, 10 x 25 mm

Wireless Speaker in ABS, it lights up in different colors, includes slot for TF card,USB port and AUX outputs, and numerous control buttons, cable for USB charging.
Dimensions: 6.0 x 6.0 cmMaterial: ABSBattery: 1 x Li-ion 400 mAhWeight: 137 grCertificate: PAHs, RoHS, Battery directive 2006/66/EC, MSDS, EMC, EN60065 (LVD), EN 62479:2010, UN38.3, EN 300 328 (RED), D. or.C. RED, Test Setup & EUT Photographs, the RED (Radio Equipment Directive), EMC (EN 301 489-1), the BSCI.
Location choice and a customizable area:
PAD printing - on the side, 25 x 30 mm

Wireless Speaker Framework, includes USB cable, volume and on / off buttons on the bottom, the power of the signal up to 10m, voltage DC 5V, battery charging time 2H, a speaker, 3W, S / N ratio: =95 db, frequency band 280HZ-16KHZ, ABS coloured.
Size: 5.2 x 5.2 x 5.1 cmMaterial: ABSBattery: 1 x Li-polymeer 400 mAhWeight: 145 grCertificate: PAHs, RoHS, Battery directive 2006/66/EC, MSDS, EMC, EN 62479:2010, IEC 60950-1, EN 300 328 (RED), D. or.C. RED, Test Setup & EUT Photographs, BSCI.
Location choice and a customizable area:
LASER - front or on the side, 40 x 25 mm
DIGITAL DIRECT - the front or on the side, 40 x 25 mm

Sea/gym/bathroom in broad-edged sponge
customizable 'easy print' band
Material: 100% CottonSize (cm): cm 100 x 180 ca
Customizable area: 40 x 7 cm (on easy print band)

Shorts Move
100% pre-restrained cotton. Shorts with elastic waistband, back pocket. (Col. SG620: 85% cot. 15% vis.)
185 g/m2
MEASURE
M
L
XL
XXL
HEIGHT
54,00
55,00
56,00
57,00
WIDTH
30,50
33,00
35,50
38,00

Wind
100% nylon. Unisex windproof jacket with retractable hood that can be closed in the pocket. Two external pockets with zip closure, full tone-on-tone zip, cuffs with elastic bands, waist cord, ventilation holes.
MEASURE
S
M
L
XL
XXL
HEIGHT
71,00
74,00
78,00
81,00
84,00
WIDTH
60,00
64,00
68,00
73,00
79,00

Wireless Speaker, it lights up in different colors, the three control buttons on the bottom of the speaker, power 3 watt, input 5V/1A battery 3.7 V/1500mAh, includes cable for charging USB to micro USB, ABS.
Size: 8.6 x 12.0 cmMaterial: ABS / PPBattery: 1 x OplaadbaarWeight: 334 gCertificate: PAHs, RoHS, Battery directive 2006/66/EC, EMC, IEC 62471, EN 62479:2010, IEC 60950-1, EN 300 328 (RED), D. or.C. RED, Test Setup & EUT Photographs.
Location choice and a customizable area:
PAD printing - front, centered, 35 x 50 mm
Silk - screen printing- hand side, 100 x 50 mm

Wireless speaker, lights up in different colors, three control buttons on the bottom of the speaker.
Power 3 watts, input input 5V/1A, battery 3.7V/1500mAh.
Includes cable for USB / micro USB charging, made of ABS.
Size: 9 x 12 cm approxMaterial: ABS/PPBattery: 1 x OplaadbaarWeight: 390 gr
Certificates: PAHs, RoHS, Battery 2006/66/EC, MSDS, EMC, IEC 62471, EN 62479:2010, IEC 60950-1, EN 300 328 (RED), D.o.C. RED, Test Setup & EUT Photographs
Choice of location and customizable area:
SCREEN PRINTING - on the side, 100 x 50 mm max
PAD PRINTING - front or back, 35 x h 50 mm max
PAD PRINTING - front bottom, 35 x h 15 mm max

Air
100% nylon waterproof taffeta. Windproof and water-repellent jacket with 100% polyester inner mesh. Full zip closure with tie rod, retractable hood, 2 front pockets with zip closure, elasticated cuffs. Resealable jacket in the right pocket with bidirectional zip.
MEASURE
S
M
L
XL
XXL
HEIGHT
72,00
75,00
78,00
81,00
84,00
WIDTH
59,00
64,00
69,00
74,00
79,00

Badge cord, key holder made of fine polyester with a metal carabiner. The ribbons of about 90 cm are printed with color sublimation for all unique designs and photographic images. This item complies with all relevant safety regulations.Ins and outs:
Lanyard width: 10mm
Material: 100% Polyester and Metal
Clip: Standard metal
Customization: Full Color Sublimation F+R. Also different graphics.
Delivery times and samples:
Full production will begin after the draft is approved.Production up to 10,000 pieces in 16/20 working days from graphic draft approval.

Badge cord, key holder made of fine polyester with a metal carabiner. The ribbons of about 90 cm are printed with color sublimation for all unique designs and photographic images. This item complies with all relevant safety regulations.Ins and outs:
Lanyard width: 15mm
Material: 100% Polyester and Metal
Clip: Standard metal
Customization: Full Color Sublimation F+R. Also different graphics.
Delivery times and samples:
Full production will begin after the draft is approved.Production up to 10,000 pieces in 16/20 working days from graphic draft approval.

Badge cord, key holder made of fine polyester with a metal carabiner. The ribbons of about 90 cm are printed with color sublimation for all unique designs and photographic images. This item complies with all relevant safety regulations.Ins and outs:
Lanyard width: 15mm
Material: 100% Polyester and Metal
Clip: Standard metal
Customization: Full Color Sublimation F+R. Also different graphics.
Delivery times and samples:
Full production will begin after the draft is approved.Production up to 10,000 pieces in 16/20 working days from graphic draft approval.

Badge cord, key holder made of fine polyester with a metal carabiner. The ribbons of about 90 cm are printed with color sublimation for all unique designs and photographic images. This item complies with all relevant safety regulations.Ins and outs:
Lanyard width: 20mm
Material: 100% Polyester and Metal
Clip: Standard metal
Customization: Full Color Sublimation F+R. Also different graphics.
Delivery times and samples:
Full production will begin after the draft is approved.Production up to 10,000 pieces in 16/20 working days from graphic draft approval.

Badge cord, key holder made of fine polyester with a metal carabiner. The ribbons of about 90 cm are printed with color sublimation for all unique designs and photographic images. This item complies with all relevant safety regulations.Ins and outs:
Lanyard width: 25mm
Material: 100% Polyester and Metal
Clip: Standard metal
Customization: Full Color Sublimation F+R. Also different graphics.
Delivery times and samples:
Full production will begin after the draft is approved.Production up to 10,000 pieces in 16/20 working days from graphic draft approval.