Adhesive labels in PVC tailored custom color HD
zoom_out_map
chevron_left chevron_right

Labels self Adhesive, Glossy PVC ( into Planks ) to measure customized with your logo

Field of application
For internal and external applications on metal, lacquered wood, glass, plastic.

Material characteristics

  • Certification of reaction to fire (B-S2-D0).
  • Film thickness: 90micron | Glossy Finish
  • The Base film is white, with excellent printability and flatness.

Customization

  • Printing Eco-Solvent color HD.
  • Life on the outside: 24/36 months
  • Length inside: indefinite

Cutting

  • Provided with means of cutting ( to facilitate the spellicolatura )
  • Supplied in planks ( 32/64 x 100/130cm )

Print File?
Just a file of good quality in 1:1 scale...we take care of the layout of the dashboard!
Might interest you: Instructions for the preparation of the file

  • Eco-Solvent color HD
  • Half-Cut
  • Square
  • Round
  • Custom shape
  • In planks
€18.29 (VAT incl.) €18.29 (VAT excl.)
VAT excluded Shipping within 72 hours
Description

The choice of material

  • PVC Monomeric white base with a finish of matte or glossy;
  • PVC Polymeric white base with a finish of matte or glossy.

Monomeric or Polymeric?

ll vinyl monomeric is the vinyl the most economical, the one that allows you to have the best quality/price ratio. It is normally used for applications of short duration 18-24 months, and especially suitable to be used on flat surfaces. After a few days starts to occur, the effect of the withdrawal, that is, the vinyl, the adhesive applied tends to shrink to a few millimeters, about 1mm to the side on a sticker 100x100 cm. You must always take into account this particularity in the application phase.

The vinyl polymer is qualitatively better. The compound of this material allows you to have an elasticity greater than the vinyl monomeric, allowing you to use it on those surfaces with a minimum of sudden changes of thickness. The vinyl polymer, made from PVC percentages higher, is therefore able to adapt to surfaces more complex (for example on the rear window of a car or on a glass bottle, ensuring a lasting medium-to-long - 24 to 36 months.

Cutting mode

  • Die cutting: the cutting of the PVC only ( label ) , leaving intact the film in the paper below allowing you to weed quickly the adhesive. In this case, the labels are supplied in sheets/coils with height 32/64 x 100/130cm.
  • Die-cutting half-cut + full cut: In this case, they are made in 2 cuts: the cutting of The PVC ( label ) and the movie in the paper below , so unwrap easily the adhesives are in this case delivered individually ( type of Stickers ).

Press information

The customization of our labels, PVC is made through printing eco solvent color in HD.
Attention: it is not supposed to print white!

Data sheet
E/PVC-AP/Y20-TV
Specific PVC
PVC Monomeric Gloss white